Precision Measuring Tools
Showing 1009–1056 of 1233 results
- Precision Measuring Tools
Mitutoyo 50.8-76.2mm Interchangeable Anvil-Spindle Tip Screw Thread Digital Micrometer, 326-353-30
Precision Measuring ToolsMitutoyo 50.8-76.2mm Interchangeable Anvil-Spindle Tip Screw Thread Digital Micrometer, 326-353-30
Key features
- Non-Slip Grip Finish & Supplied in Fitted Plastic Case.
- Water & Dust Protection & SPC Output (Series 326).
- 60 Degree or 55 Degree V-Anvil & Conical Spindle (interchangeable).
SKU: n/a - Precision Measuring Tools
Mitutoyo 50.8-76.2mm Non-Rotating Spindle Blade Digital Micrometer, 422-332-30
Precision Measuring ToolsMitutoyo 50.8-76.2mm Non-Rotating Spindle Blade Digital Micrometer, 422-332-30
Key features
- Non-Slip Grip Finish & Supplied in Fitted Plastic Case.
- Ratchet Stop for Constant Force & Anvil & Spindle Blade for Measuring the Groove Diameter of Shafts, Keyways & Other Hard-to-Reach Areas.
SKU: n/a - Precision Measuring Tools
Mitutoyo 500-600 mm Digital Interchangeable Anvil Outside Micrometer, 340-522
Precision Measuring ToolsMitutoyo 500-600 mm Digital Interchangeable Anvil Outside Micrometer, 340-522
Key features
- with a Ratchet Stop for Constant force.
- Wide Measuring Range with in Terchangeable Anvils.
- Supplied in Fitted Wooden Case & with SPC Output (Series 340).
- Supplied with Zero-Setting Standards Bar for Each Range.
SKU: n/a - Precision Measuring Tools
Mitutoyo 500-600 mm Extension Anvil Collar Outside Micrometer, 105-103
Key features
- with Ratchet Stop for Constant force.
- 50 mm Spindle Stroke & Supplied in a Fitted Wooden Case.
- Wide Measuring Range with Extensi on Anvil Collars.
- Supplied with Zero-Setting Standards Bar for Each Range.
- Workpiece Stopper (For Models Over 1000 mm Range) & Square & Round Pipes Are Combined for Light Weight & Rigid Frame (For Models Over 1000 mm Range).
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-418 Bore Gage without Dial, Range: 0.6-1.4 inch
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-420 Bore Gage without Dial, Range: 2-6 inch
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-425 Bore Gage with Dial Face 2046SB, Range: 15-35 mm
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-437 Bore Gage with Dial Face 2109SB-10, Range: 50-150 mm
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-803 Bore Gage with Micrometer Head without Indicator, Range: 60-100 mm
Precision Measuring ToolsMitutoyo 511-803 Bore Gage with Micrometer Head without Indicator, Range: 60-100 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-804 Bore Gage with Micrometer Head without Indicator, Range: 100-160 mm
Precision Measuring ToolsMitutoyo 511-804 Bore Gage with Micrometer Head without Indicator, Range: 100-160 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-807 Bore Gage with Micrometer Head without Indicator, Range: 400-600 mm
Precision Measuring ToolsMitutoyo 511-807 Bore Gage with Micrometer Head without Indicator, Range: 400-600 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-808 Bore Gage with Micrometer Head without Indicator, Range: 600-800 mm
Precision Measuring ToolsMitutoyo 511-808 Bore Gage with Micrometer Head without Indicator, Range: 600-800 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-813 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 60-100 mm
Precision Measuring ToolsMitutoyo 511-813 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 60-100 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-814 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 100-160 mm
Precision Measuring ToolsMitutoyo 511-814 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 100-160 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-815 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 150-250 mm
Precision Measuring ToolsMitutoyo 511-815 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 150-250 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-816 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 250-400 mm
Precision Measuring ToolsMitutoyo 511-816 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 250-400 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-817 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 400-600 mm
Precision Measuring ToolsMitutoyo 511-817 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 400-600 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-818 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 600-800 mm
Precision Measuring ToolsMitutoyo 511-818 Bore Gage with Micrometer Head with Dial Face 2046SB, Range: 600-800 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-823 Bore Gage with Micrometer Head with Dial Face 2109SB-10, Range: 60-100 mm
Precision Measuring ToolsMitutoyo 511-823 Bore Gage with Micrometer Head with Dial Face 2109SB-10, Range: 60-100 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-826 Bore Gage with Micrometer Head with Dial Face 2109SB-10, Range: 250-400 mm
Precision Measuring ToolsMitutoyo 511-826 Bore Gage with Micrometer Head with Dial Face 2109SB-10, Range: 250-400 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-827 Bore Gage with Micrometer Head with Dial Face 2109SB-10, Range: 400-600 mm
Precision Measuring ToolsMitutoyo 511-827 Bore Gage with Micrometer Head with Dial Face 2109SB-10, Range: 400-600 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-828 Bore Gage with Micrometer Head with Dial Face 2109SB-10, Range: 600-800 mm
Precision Measuring ToolsMitutoyo 511-828 Bore Gage with Micrometer Head with Dial Face 2109SB-10, Range: 600-800 mm
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-833 Bore Gage with Micrometer Head without Indicator, Range: 2.4-4.0 inch
Precision Measuring ToolsMitutoyo 511-833 Bore Gage with Micrometer Head without Indicator, Range: 2.4-4.0 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-834 Bore Gage with Micrometer Head without Indicator, Range: 4.0-6.4 inch
Precision Measuring ToolsMitutoyo 511-834 Bore Gage with Micrometer Head without Indicator, Range: 4.0-6.4 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-835 Bore Gage with Micrometer Head without Indicator, Range: 6.0-10 inch
Precision Measuring ToolsMitutoyo 511-835 Bore Gage with Micrometer Head without Indicator, Range: 6.0-10 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-836 Bore Gage with Micrometer Head without Indicator, Range: 10-16 inch
Precision Measuring ToolsMitutoyo 511-836 Bore Gage with Micrometer Head without Indicator, Range: 10-16 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-837 Bore Gage with Micrometer Head without Indicator, Range: 16-24 inch
Precision Measuring ToolsMitutoyo 511-837 Bore Gage with Micrometer Head without Indicator, Range: 16-24 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-838 Bore Gage with Micrometer Head without Indicator, Range: 24-32 inch
Precision Measuring ToolsMitutoyo 511-838 Bore Gage with Micrometer Head without Indicator, Range: 24-32 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-843 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 2.4-4.0 inch
Precision Measuring ToolsMitutoyo 511-843 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 2.4-4.0 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-844 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 4.0-6.4 inch
Precision Measuring ToolsMitutoyo 511-844 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 4.0-6.4 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-846 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 10-16 inch
Precision Measuring ToolsMitutoyo 511-846 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 10-16 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-847 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 16-24 inch
Precision Measuring ToolsMitutoyo 511-847 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 16-24 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-848 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 24-32 inch
Precision Measuring ToolsMitutoyo 511-848 Bore Gage with Micrometer Head with Dial Face 2922SB, Range: 24-32 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-853 Bore Gage with Micrometer Head with Dial Face 2923SB-10, Range: 2.4-4.0 inch
Precision Measuring ToolsMitutoyo 511-853 Bore Gage with Micrometer Head with Dial Face 2923SB-10, Range: 2.4-4.0 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 511-857 Bore Gage with Micrometer Head with Dial Face 2923SB-10, Range: 16-24 inch
Precision Measuring ToolsMitutoyo 511-857 Bore Gage with Micrometer Head with Dial Face 2923SB-10, Range: 16-24 inch
Key features
- Wide Measuring Range with Sub-Anvils.
- Carbide Ball Contact Point for Durability.
- Extension Rods (Optional) can be Attached for Measuring Deep Holes.
- Interchangeable Anvil is Attached to a Micrometer Head for Accurate Dimensional Setting.
SKU: n/a - Precision Measuring Tools
Mitutoyo 52-56 inch Extension Anvil Collar Outside Micrometer, 105-431
Key features
- with Ratchet Stop for Constant force.
- 50 mm Spindle Stroke & Supplied in a Fitted Wooden Case.
- Wide Measuring Range with Extensi on Anvil Collars.
- Supplied with Zero-Setting Standards Bar for Each Range.
- Workpiece Stopper (For Models Over 1000 mm Range) & Square & Round Pipes Are Combined for Light Weight & Rigid Frame (For Models Over 1000 mm Range).
SKU: n/a - Precision Measuring Tools
Mitutoyo 526-152-11 Bore Gage with Dial Face 2109SB-10, Range: 3.7-7.3 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a
