Electrical Power Testing
Showing 433–480 of 832 results
- Electrical Power Testing
Mitutoyo 0-8 inch Absolute Dial Depth Gage, 7217S
Key features
- Wide Probing Range is Available with The Supplied Extension Rod.
- Designed with A Back-Plunger Type Dial indicator for Upward Facing Readings.
- Bottom Surface of The Base is Hardened Ground & Lapped for Highest Degree of Flatness.
SKU: n/a - Electrical Power Testing
Mitutoyo 0-8 inch Absolute Dial Depth Gage, 7218S
Key features
- Wide Probing Range is Available with The Supplied Extension Rod.
- Designed with A Back-Plunger Type Dial indicator for Upward Facing Readings.
- Bottom Surface of The Base is Hardened Ground & Lapped for Highest Degree of Flatness.
SKU: n/a - Electrical Power Testing
Mitutoyo 0-8 inch Absolute Dial Depth Gage, 7237T
Key features
- Wide Probing Range is Available with The Supplied Extension Rod.
- Designed with A Back-Plunger Type Dial indicator for Upward Facing Readings.
- Bottom Surface of The Base is Hardened Ground & Lapped for Highest Degree of Flatness.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-415 Bore Gage without Dial, Range: 15-35 mm
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-417 Bore Gage without Dial, Range: 50-150 mm
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-419 Bore Gage without Dial, Range: 1.4-2.4 inch
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-426 Bore Gage with Dial Face 2046SB, Range: 35-60 mm
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-427 Bore Gage with Dial Face 2046SB, Range: 50-150 mm
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-428 Bore Gage with Dial Face 2922SB, Range: 0.6-1.4 inch
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-429 Bore Gage with Dial Face 2922SB, Range: 1.4-2.4 inch
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-435 Bore Gage with Dial Face 2109SB-10, Range: 15-35 mm
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-436 Bore Gage with Dial Face 2109SB-10, Range: 35-60 mm
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-438 Bore Gage with Dial Face 2923SB-10, Range: 0.6-1.4 inch
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-439 Bore Gage with Dial Face 2923SB-10, Range: 1.4-2.4 inch
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-440 Bore Gage with Dial Face 2923SB-10, Range: 2-6 inch
Key features
- Measure ID at Position Close to the Bottom of Blind Holes.
- Carbide-Contact Point Ensures High Durability & Wear Resistance.
- Grip is Large & Hollow to Reduce Effect of Body Heat on High-Accuracy Measurements.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-521 Absolute Digimatic Bore Gage, Range: 45-100 mm
Key features
- Up to Four Rods (250 mm or 500 mm) Used.
- An Analog Bar Indicator is Integrated to Enhance the Intuition in Reading.
- Designed for ID Measurement & Minimum Value Holding Function Provides the Easy Detection of Hole.
- Go/no-go Judgment is Performed by Setting the Upper & Lower Tolerances.
SKU: n/a - Electrical Power Testing
Mitutoyo 511-522 Absolute Digimatic Bore Gage, Range: 100-160 mm
Key features
- Up to Four Rods (250 mm or 500 mm) Used.
- An Analog Bar Indicator is Integrated to Enhance the Intuition in Reading.
- Designed for ID Measurement & Minimum Value Holding Function Provides the Easy Detection of Hole.
- Go/no-go Judgment is Performed by Setting the Upper & Lower Tolerances.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-122 Bore Gage with Dial Face 2923SB-10, Range: 0.3-0.4 inch
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-123 Bore Gage with Dial Face 2923SB-10, Range: 0.4-0.7 inch
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-152-10 Bore Gage with Dial Face 2109SB-10, Range: 3.7-7.3 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-153-11 Bore Gage with Dial Face 2046SB, Range: 3.7-7.3 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-156-10 Bore Gage with Dial Face 2923SB-10, Range: 0.146-0.287 inch
Electrical Power TestingMitutoyo 526-156-10 Bore Gage with Dial Face 2923SB-10, Range: 0.146-0.287 inch
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-156-11 Bore Gage with Dial Face 2923SB-10, Range: 0.146-0.287 inch
Electrical Power TestingMitutoyo 526-156-11 Bore Gage with Dial Face 2923SB-10, Range: 0.146-0.287 inch
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-162-10 Bore Gage with Dial Face 2109SB-10, Range: 1.5-3.95 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-162-11 Bore Gage with Dial Face 2109SB-10, Range: 1.5-3.95 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-163-10 Bore Gage with Dial Face 2046SB, Range: 1.5-3.95 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-163-11 Bore Gage with Dial Face 2046SB, Range: 1.5-3.95 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-166-11 Bore Gage with Dial Face 2923SB-10, Range: 0.059-0.156 inch
Electrical Power TestingMitutoyo 526-166-11 Bore Gage with Dial Face 2923SB-10, Range: 0.059-0.156 inch
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-172-10 Bore Gage with Dial Face 2109SB-10, Range: 0.95-1.55 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-172-11 Bore Gage with Dial Face 2109SB-10, Range: 0.95-1.55 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a - Electrical Power Testing
Mitutoyo 526-173-10 Bore Gage with Dial Face 2046SB, Range: 0.95-1.55 mm
Key features
- These Bore Gages Measure Diameters of Small Holes.
- The Radial Displacement of Split-Ball Contact is Converted to Axial Displacement of Measuring Rod, which is Shown on the Dial Indicator.
SKU: n/a
