National 18L Water Based Textured Coating Synplast Drum, A230

Trowel

18 L

touch Dry: 1 to 2 hrs

Full Dry: 48 hrs

Specific Groove Texture / Matt

A230

National Synplast is recommended as an interior/exterior wall finish to concrete, plaster, gypsum board, asbestos, wood etc. for a specific groove textured & appearances. for uniform texture & appearance the surface has to be properly leveled & primed, prior to apply National Synplast. It is highly suitable for villas, industrial & commercial buildings, museums, exhibition center etc. Over coating with National Acrylic Clear Glaze will reduce the dust collections on the surface

Generally, most of the water base paints are quite safe to handle with due precautions

As a general rule, avoid skin & eye contact by wearing overalls, gloves, goggles, & mask etc

Spillage on skin should immediately be removed by thorough washing with water & soap or suitable cleaner

Eye should be flushed with fresh water

Avoid inhalation of vapours & paint mist by wearing suitable mask

In the event of ingestion & eye contact, seek medical attention immediately

Painting must be carried out in well-ventilated area

Local safety regulations to be Followed

1.8 ? 0.05

Store the paint in proper storage conditions as per the local regulations. Keep the paint container in sealed condition under shed, away from direct sunlight and extreme temperatures. Do not keep paint material near to any ignition sources. Do not put back the half or unused material back in original container, containing the supplied paint, to avoid contamination. Handle with care. Stir well before use

Textured Coatings (Water Based)