National 18L Nutex Spray Texture, A021

Special Spray Gun with Hopper

18 L

touch Dry: 4 to 6 hrs

Dry to Recoat: 24 to 48 hrs

Full Dry: 48 hrs

Light / Medium / Heavy Textures / Matt

A021

As a high build intermediate texture coating for old & new interior/exterior concrete surfaces, plaster, brickwork, masonry work etc. It can also be used as an intermediate texture coat to hide the surface imperfections. It is mostly used as an intermediate texture coat for National Acrylic Rock. National Tile & National Eco Systems. It is always recommended to over coat with National exterior system. for coloured Nutex it is recommended to over coat with Nationalthane Varnish or National Acrylic Clear

Generally, most of the water base paints are quite safe to handle with due precautions

As a general rule, avoid skin & eye contact by wearing overalls, gloves, goggles, & mask etc

Spillage on skin should immediately be removed by thorough washing with water & soap or suitable cleaner

Eye should be flushed with fresh water

Avoid inhalation of vapours & paint mist by wearing suitable mask

In the event of ingestion & eye contact, seek medical attention immediately

Painting must be carried out in well ventilated area

Local safety regulations to be followed.

1.60 ? 0.05

Store the paint in proper storage conditions as per the local regulations. Keep the paint container in sealed condition under shed, away from direct sunlight and extreme temperatures. Do not keep paint material near to any ignition sources. Do not put back the half or unused material back in original container, containing the supplied paint, to avoid contamination. Handle with care. Stir well before use

Tile Coating and Stone Finish